Hengstler RI58-D Series Incremental Incremental Encoder, 5000 Ppr, RS422 Signal, Hollow Type, 12mm Shaft

TE Connectivity QSFP Cage Assembly 1-Position, Body Orientation: 180°, Straight, Contact Plating: Nickel, Housing Material: Stainless Steel, Termination Method: Press Fit, Through Hole, MPN: 1-2385800-2.

7mm, Maximum Wire Size (AWG): 14AWG, Minimum Wire Size (AWG): 16AWG, Contact Material: Copper, Contact Plating: Tin, Overall Length: 32.2mm, MPN: 160136.6mm² Wire Size, Blue, Insulation Material: PVC, Inner Ring Diameter: 10.5mm, Outer Ring Diameter: 16.

TE Connectivity 100kΩ, 0402 (1005M) Thin Film SMD Resistor ±0.063W - CPF0402B100KE1, Temperature Coefficient: ±25ppm/°C, Minimum Operating Temperature: -55°C, Maximum Operating Temperature: +155°C.1% 0.

Ewellix Makers in Motion Linear Guide Carriage LLTHZ 30 S6, LLTHZ, For Rail Width: 30mm, Carriage Length: 59mm, Carriage Width: 3.4mm.

BASF 2.85mm Red TPC 45D 3D Printer Filament, 500g, Printing Technology: FDM, For Use With: Any 3D Printer, MPN: 1303050009.

BASF 2.85mm Silver TPC 45D 3D Printer Filament, 500g, Printing Technology: FDM, For Use With: Any 3D Printer, MPN: 1303050003.

Hengstler RI58-D Series Incremental Incremental Encoder, 5000 ppr, RS422 Signal, Hollow Type, 12mm Shaft, Maximum Revolutions: 6000rpm, Supply Voltage: 5 V dc, IP Rating: IP64, IP65, Overall Height: 41.5mm, Minimum Operating Temperature: -10°C, Maximum Operating Temperature: +70°C, MPN: RS0-532-315.

BASF 2.85mm Yellow Ultrafuse ABS 3D Printer Filament, 750g, Printing Technology: FFF Technology, For Use With: 3D Printers, MPN: 1303020023.

5mm, Minimum Operating Temperature: -10°C, Maximum Operating Temperature: +70°C, MPN: RS0-532-315.Hengstler RI58-D Series Incremental Incremental Encoder, 5000 ppr, RS422 Signal, Hollow Type, 12mm Shaft, Maximum Revolutions: 6000rpm, Supply Voltage: 5 V dc, IP Rating: IP64, IP65, Overall Height: 41.

BASF 2.85mm Yellow Ultrafuse ABS 3D Printer Filament, 750g, Printing Technology: FFF Technology, For Use With: 3D Printers, MPN: 1303020023.