DiodesZetex Diodes Inc Switching Diode, 2A 200V, 2-Pin SMA ES2DA-13-F

Red Lion Plug-in Card For Use With PAX2A Dual Line Display Meter, MPN: PAXCDC10.

, 111.10, Gauge Outside Diameter: 50mm, Pressure Gauge Type: Dial, MPN: 30603641.WIKA G 1/4 Analogue Analogue Positive Pressure Gauge 4bar Bottom Entry, 0bar min.

TE Connectivity Commercial MATE-N-LOK Series Female Crimp Terminal, 20AWG Min, 14AWG Max, For Use With: Commercial MATE-N-LOK Connector Housing, Minimum Wire Size (mm²): 0.5mm², Maximum Wire Size (mm²): 2mm², Contact Plating: Tin, Contact Material: Phosphor Bronze, MPN: 61117-4.

0mm Pitch, 1 Row(s), Shrouded, Pitch: 2mm, Connector System: Wire to Board, Termination Method: Solder, Contact Material: Brass, Contact Plating: Tin, Current Rating: 2A, MPN: 53254-0870.Molex Micro-Latch Series Right Angle Through Hole PCB Header, 8 Contact(s), 2.

5mm, Width: 9.

3 V, ADC Resolution: 10bit.048, Package Type: TQFP, Mounting Type: Surface Mount, Program Memory Size: 160 (Boot Flash) kB, 2.048 (Flash) MB, RAM Size: 512 kB, ADC Channels: 40, Typical Operating Supply Voltage: 3.Microchip PIC32MZ2048EFM100-I/PF, 32bit MIPS® MicroAptiv™ Microcontroller, PIC32, 200MHz, 160 (Boot Flash) kB, 2.

DiodesZetex Diodes Inc Switching Diode, 2A 200V, 2-Pin SMA ES2DA-13-F, Diode Configuration: Single, Mounting Type: Surface Mount, Diode Technology: Silicon Junction, Maximum Forward Voltage Drop: 920mV, Maximum Diode Capacitance: 25pF, Minimum Operating Temperature: -55 °C, Maximum Operating Temperature: +150 °C, Length: 2.

RS PRO Adhesive, 150 g, Adhesive Type: Epoxy Adhesive, Application: Bonding, Material Compatibility: Ceramic, Concrete, Metal, Plastic, Wood, Colour: Transparent, Package Type: Bag, Cure Time: 24 h, Viscosity Measurement: 12000 → 15000cP/s, Maximum Operating Temperature: +100°C, Special Features: A Fast Setting Two-Part Epoxy Resin, Chemical Composition: 2, 4, 6-Tris(Dimethylaminomethyl)Phenol, Minimum Operating Temperature: -55°C, Odour: Characteristic, Operating Temperature Range: -55 → +100 °C, Setting Time: 3 → 5min.

1mm.

RS PRO Adhesive, 150 g, Adhesive Type: Epoxy Adhesive, Application: Bonding, Material Compatibility: Ceramic, Concrete, Metal, Plastic, Wood, Colour: Transparent, Package Type: Bag, Cure Time: 24 h, Viscosity Measurement: 12000 → 15000cP/s, Maximum Operating Temperature: +100°C, Special Features: A Fast Setting Two-Part Epoxy Resin, Chemical Composition: 2, 4, 6-Tris(Dimethylaminomethyl)Phenol, Minimum Operating Temperature: -55°C, Odour: Characteristic, Operating Temperature Range: -55 → +100 °C, Setting Time: 3 → 5min.