Sanyo Denki 109P Series Axial Fan, 24 V Dc, DC Operation, 8.2cfm, 1.68W, 70mA Max, 40 X 40 X 20mm

Air Conditioning & Fans

Rating :- 9.27 /10

Votes :- 7

Lapp 4 Core Power Cable, 2.5 mm², 100m, Black Rubber Sheath, 26 A, 450/750 V

1 → 15.

Electrical Power & Industrial Cables

Cables & Wires

Power Cable

Lapp

Sanyo Denki Fan Inlet Ring for use with Centrifugal Fan, Splash Proof Centrifugal Fan

Sanyo Denki Fan Inlet Ring for use with Centrifugal Fan, Splash Proof Centrifugal Fan, Inner Diameter: 155mm, Outer Diameter: 252mm, Depth: 7mm, MPN: 109-1135.

Fan Accessories

Fan Inlet Rings

Sanyo Denki

ISSI SRAM, IS61C5128AS-25QLI- 4Mbit

75 x 11.

Wago 243 Series PCB Terminal Block, 5.75mm Pitch, Cable Mount, Push In Termination

75mm Pitch, Cable Mount, Push In Termination, Gender: Female, Type: Push Wire Terminal Block, Current Rating: 6A, Colour: Grey, Red, Voltage Rating: 250 V, Material: Polyamide, MPN: 243-211.

Mechanical & Fluid Power & Tools

RS PRO Flame Retardant, 25m x 1.5mm x 25mm

RS PRO Flame Retardant, 25m x 1.5mm x 25mm, Maximum Operating Temperature: +600°C, Flame Retardant: Yes.

Engineering Materials & Industrial Hardware

Insulation Materials

Glass Fibre Tape & Glass Rope

RS PRO

BALLUFF Right Angle Female 5 way M12 to Unterminated Sensor Actuator Cable, 5m

BALLUFF Right Angle Female 5 way M12 to Unterminated Sensor Actuator Cable, 5m, Cross Sectional Area: 0.

Electrical Power & Industrial Cables

Cables & Wires

Sensor & Actuator Cables

BALLUFF

Sanyo Denki 109P Series Axial Fan, 24 V dc, DC Operation, 8.2cfm, 1.68W, 70mA Max, 40 x 40 x 20mm

68W, 70mA Max, 40 x 40 x 20mm, Height: 40mm, Termination Type: Lead Wire, Noise Level: 35dB(A), Direction of Curve: Forward, Bearing Type: Ball, MPN: 109P0424H6D01.2cfm, 1.

Air Conditioning & Fans

Axial Fans

Sanyo Denki

Murata Ferrite Bead (Chip Ferrite Bead), 2 x 1 x 0.5mm (0804 (2010M)), 120Ω impedance at 100 MHz

5mm (0804 (2010M)), 120Ω impedance at 100 MHz, Current Rating: 200mA, Length: 2mm, Depth: 1mm, Maximum DC Resistance: 350mΩ, Application: EMI Suppression Filter, High Speed Signal Lines, Series: BLA2ABD, MPN: BLA2ABD121SN4D.Murata Ferrite Bead (Chip Ferrite Bead), 2 x 1 x 0.

Passive Components

EMI Filters & Protection

Ferrite Beads

Murata

Sanyo Denki 109P Series Axial Fan, 24 V dc, DC Operation, 8.2cfm, 1.68W, 70mA Max, 40 x 40 x 20mm

68W, 70mA Max, 40 x 40 x 20mm, Height: 40mm, Termination Type: Lead Wire, Noise Level: 35dB(A), Direction of Curve: Forward, Bearing Type: Ball, MPN: 109P0424H6D01.

Air Conditioning & Fans

Axial Fans

Sanyo Denki

Murata Ferrite Bead (Chip Ferrite Bead), 2 x 1 x 0.5mm (0804 (2010M)), 120Ω impedance at 100 MHz

Murata Ferrite Bead (Chip Ferrite Bead), 2 x 1 x 0.5mm (0804 (2010M)), 120Ω impedance at 100 MHz, Current Rating: 200mA, Length: 2mm, Depth: 1mm, Maximum DC Resistance: 350mΩ, Application: EMI Suppression Filter, High Speed Signal Lines, Series: BLA2ABD, MPN: BLA2ABD121SN4D.