RS PRO 36 W LED Batten Light, 220 → 240 V Batten, 1 Lamp, 1.22 M Long, IP20

x 150m Length 2:1 Ratio, HT-200 Series.

: 9001KR2UH5, Minimum Operating Temperature: -25°C, Terminal Type: Screw, Maximum Operating Temperature: +70°C.

ifm electronic Pressure Sensor, -1bar Min, 25bar Max, Analogue + PNP-NO/NC Programmable Output, Relative Reading, Accuracy: .

Dremel Gas Soldering Iron Kit, Model Number: 2000-6, Tip Series: Versatip, Soldering Tip Temperature: 550°C, MPN: F0132000JA.

Microchip ATTINY13-20PU, 8bit AVR Microcontroller, ATtiny13, 20MHz, 1 kB Flash, 8-Pin PDIP, Mounting Type: Through Hole, RAM Size: 64 B.

5 %, Media Measured: Fluid, Process Connection: G1/4, Electrical Connection: M12 Connector, Communication Protocol: IO-LINK, Response Time: .ifm electronic Pressure Sensor, -1bar Min, 1bar Max, 2x PNP/NPN-NO/NC Output, Relative Reading, Accuracy: ±0.

RS PRO 36 W LED Batten Light, 220 → 240 V Batten, 1 Lamp, 1.22 m Long, IP20, Batten Type: Single, Width: 75 mm, Depth: 23.7 mm, Colour Tone: Cool White, Colour Temperature: 4000K, Life Hours: 25000h.

IXYS MMO62-12io6, Dual Thyristor Module 1200V, 30A 150mA, Thyristor Type: SCR, Package Type: SOT-227B, Surge Current Rating: 430A, Mounting Type: Surface Mount, Maximum Gate Trigger Voltage: 1.23 x 25.

7 mm, Colour Tone: Cool White, Colour Temperature: 4000K, Life Hours: 25000h.22 m Long, IP20, Batten Type: Single, Width: 75 mm, Depth: 23.

22mm, Maximum Operating Temperature: +125 °C, Minimum Operating Temperature: -40 °C.25 x 12.